Plan · 01
Unlimited
for 1 day · 2 GB/day full speed, then 2 Mbps
$8.90
USD
For when you stop counting gigabytes.
Apple · 2019
Compatible
Install your Australia eSIM
on iPhone 11.
Yes — iPhone 11 supports eSIM in Australia. Dual SIM, no 5G. travel.to routes you to Telstra, Optus, Vodafone AU automatically — you don't pick the carrier, your phone does.
Compatibility check
What checks out before payment.
eSIM supported
iPhone 11 (2019) ships with eSIM hardware.
Carrier coverage
3 partner carriers in Australia · auto-handoff between them.
Speed band
90 – 220 Mbps urban · 45 ms RTT.
Install · IOS
6 steps from QR to online.
-
01
Open Settings on your iPhone
Tap the Settings app (gray gear icon) from your home screen or App Library.
-
02
Go to Cellular (or Mobile Data)
Scroll to Cellular. On some regions iOS labels this Mobile Data instead.
-
03
Tap Add eSIM
Choose Add eSIM (older iOS calls this Add Cellular Plan).
-
04
Choose Use QR Code
Tap Use QR Code, then open the eSIM email from travel.to on another device and scan the QR.
-
05
Label the line travel.to
When iOS asks for a label, pick travel.to so you can tell it apart from your home SIM.
-
06
Confirm and finish
Confirm the default line settings. Your phone will activate the eSIM on landing — you don't need to do anything else until you reach your destination.
Once installed, the eSIM is dormant until iPhone 11 reaches a partner carrier's network in Australia — typically the moment you land. No manual switch, no carrier app.
Australia network
What to expect on iPhone 11 in Australia.
- Carriers
- Telstra · Optus · Vodafone AU
- Network
- 90 – 220 Mbps urban · 45 ms RTT
- Time zone
- 3 zones · UTC+8 to UTC+11
- Roaming alt cost
- $20 – 40/GB on default home-carrier roaming — travel.to is an order of magnitude cheaper.
Plans for Australia
Pick a plan and we'll email your QR.
Plan · 02
Unlimited
for 3 days · 2 GB/day full speed, then 2 Mbps
$19.13
USD
For when you stop counting gigabytes.
Plan · 03
Unlimited
for 5 days · 30 GB/day full speed, then 2 Mbps
$25.20
USD
For when you stop counting gigabytes.
Our pick
Plan · 04
Unlimited
for 7 days · 2 GB/day full speed, then 2 Mbps
$39.58
USD
For when you stop counting gigabytes.
Plan · 05
Unlimited
for 10 days · unlimited at full speed
$42
USD
For when you stop counting gigabytes.
Plan · 06
Unlimited
for 15 days · unlimited at full speed
$56.70
USD
For when you stop counting gigabytes.
Plan · 07
Unlimited
for 30 days · 2 GB/day full speed, then 2 Mbps
$157.25
USD
For when the trip becomes the month, and the month becomes the work.
iPhone 11 in Australia
Common questions.
Yes. iPhone 11 ships with eSIM hardware, and travel.to routes it onto Telstra, Optus, and Vodafone AU in Australia. The line activates the moment you land — install takes under two minutes and is fully refundable if it fails to activate.
Yes. iPhone 11 supports dual SIM worldwide, so your home SIM stays in the tray and travel.to installs alongside it as a second line. No swapping, no removing your primary number.
On iPhone 11 open Settings → Cellular → Add eSIM, choose Use QR Code, and scan the QR from your travel.to email. That is 6 taps from QR to online. iOS labels the path "Mobile Data" in some regions.
Under two minutes. The QR arrives by email seconds after payment; 6 taps later the profile is installed on iPhone 11. It stays dormant until you reach a partner network in Australia (3 zones · UTC+8 to UTC+11) — usually the instant you land, before you have changed your clock.
In Australia we route on Telstra, Optus, and Vodafone AU. iPhone 11 hands off automatically to whichever has the strongest signal where you are — you do not pick the carrier, the phone does.
90 – 220 Mbps urban · 45 ms RTT. iPhone 11 negotiates the fastest band the local network offers, so in covered areas you get the same speeds a native SIM would pull on the same carrier.
Default home-carrier roaming in Australia runs about $20 – 40 per GB. A travel.to plan for Australia sits an order of magnitude below that, and you never get a surprise bill — you pay once, up front, for the data you chose.
No need. The airport SIM kiosks in Australia keep limited hours (Sydney SYD / Melbourne MEL · 24h) and you would queue at them with the rest of your flight. Install the travel.to eSIM on iPhone 11 before you board and you walk straight past them, already online.
Three carriers per region · auto-failover below signal threshold iPhone 11 falls back automatically — you never have to switch networks by hand.
Yes. Top-ups reuse the Australia eSIM profile already on iPhone 11 — no new QR scan, no second install. Same line, fresh data, added from your Australia order page in one tap.
Full refund if the Australia eSIM fails to activate on iPhone 11. Half refund if it activates but underperforms on Telstra, Optus, and Vodafone AU (and if you used under 500 MB, you get the full amount). One click from your dashboard — no email thread.
A few iPhone 11-specific notes: Older iOS — you may need to update to iOS 17 for the latest eSIM install flow. Beyond that, the travel.to install flow in Australia is the standard iOS path.
Keep exploring